HINT HAND DRIVE POSITION

Basic position the right hand while driving the left hand in position 9 and the right hand position in 3 hours. Position of thumb should be straight on the wheel and not go to the circle wheel.
Avoid driving habits with the one hand, the hands and driving with the fingers into the wheel rim. In addition to easy to lose control when the pilot car, you also risk injury and even death danger.
       There are 2 techniques trick the right wheel are as follows :

1. Push-pull
   It is a technique helm the most basic and safe to use in various situations, whether driving on low speed or high.
2. Cross
   This technique can be used at low speeds but requires radius play a wide, such as when parking or turn direction.

Braking technique
One of the features associated with the braking technique is Anti Lock Brake System (ABS), Electronic Brake Force Distribution (EBD) and Brake Assist (BA).
ABS function is not locked so that the ban occurred during braking.
Vengeance is the tread brake pedal while you drive the car to a safer place.
EBD braking power to distribute work to each wheel according to vehicle load. This mechanism works with ABS and brake is very useful when on the road swing.
In the meantime, BA is useful to increase braking power when brake suddenly. This mechanism works based on the speed of tread brake pedal on the condition of emergency. So that the board but with a little fast, the car can stop quickly.

to be continued

SIT RIDING POSITION

There are 3 important things that we will get the position when we are sitting right, namely :

1. Communication
   Easy to communicate with another rider and monitoring the situation outside the car.
2. Leisure
   Not easily tired and always sprightly despite driving distance.
3. Control
   It's easy to feel the early symptoms when the car starts to lose balance. So that it can immediately anticipate.

To get the right position to sit in the case follow the procedure :

• Seat belts
  Always use seat belts as a primary safety protective equipment.
  Make sure that the voice sounded CLICK!, When installing.
  Use the right seat belt, must go through the bones and the shoulder belt. Use the height of the seat belt so that makes it easy to get the right position to sit.
• Distance chairs
  Set the distance so that the chair you easily operate the gas pedal, brake and clutch.
• Back chairs
  Back seat position must be comfortable, not too straight, but not too sloping.
• Proximity to the helm of Body
  Proximity to the helm of the ideal body that is about 25cm.
  How to measure, place the two on your wrist 12 hours.
  And set the back seat.
• The brace position
  Place the head rest in line with a high head.
• Altitude rudder
  Adjust the height of the helm to feel comfortable driving.

Once seated comfortably, do check the following :

1. Dashboard Instrument checks
   Check all indicators in the dashboard when the key in the ON position. For vehicles equipped with ABS and SRS airbag, make sure the car when the indicator light is off.
2. The rearview mirror
   Set all the position of rearview mirror that makes it easy to monitor the situation outside the car.
3. Check lamp-light
   Make sure all the lamp to function properly.

to be continued

SAFELY IN RAINY SEASON

Be careful driving in the wet season, because rainfall is down a lot of the drivers of vehicles must be extra careful and ready to water or even flooding. You need to remember is not the car you drive amphibi able to run into the water as any. But you also need not fear if forced to go through water up to a knee adults.
Below are some driving tips in the rainy season that need to be:

1. Brake device.
   When the device is still using the vehicle brake system Tromol, after the flood, you do not forget to tread brake lever repeatedly to use your brakes to dry again Tromol not reduce the power works. For when the vehicle run into a flood, brake components are part of the water submerged. If the wet brake Tromol the power of a reduced or absent altogether. Therefore Tromol brake should always dry.
2. Note the cable plug and distributor.
   Do not leave them exposed to water. However, when the sprayed water as well, you just blow-dry with the dust. That must be maintained, lest the water into the intake manifold. If this occurs, can be broken-down machine and you must issue a lot of cost to fix.
3. Indeed, many drivers do not observe the rubber-rubber cover this deck. Rubber installed under the carpet that serves as a barrier so that water did not dampen the car floor, There is not one you look back one by one. If that is damaged or loose, I immediately changed course. It seems trivial but if water is entering cabin, which also bothered you.
4. Check back the electricity system in all corners of your vehicle. The meaning is, you should check that all cable connections exfoliate. Connector is loose or open, fast disolder again. Who knows after repair audio systems, sure to tidy up your cable-cord connection.
5. If the water to seep into the cabin on a cable connection, and can evoke a short relationship (korsluiting) who decided fuse for electric circuit. Check the electrical system you can do in your own spare time. While the rain has not come down again, so no one's done now.
6. To pass the road that stagnant water, you must be confident and believe in themselves. Enter the gear teeth to a position and press the gas slowly until the needle point lap engine number 3000 rpm. Do not you tread gas repeatedly. This is only the fan will suck air in the engine number of lots. If the fan to suck up the water, the effect will be dangerous for the engine. You also do not need to worry if the discharge of water entering the channel (exhaust).
   Yet if we turn on the machine, water hose shoved out by waste gas.

STANDARD CAR CHECKS

• Check the Foreign Cars
  Before using check the condition of the car around the body, make sure all in good condition and road worthy.
• Tire checks
  Check air pressure and tire condition of the car (including the spare tire) at least once a week before the car is used. Check the pressure with the wind Tire Presure gauge, and make sure pressure in accordance with the standards.
  To check the tire thickness, please use Trade Wear Indicator, which is a triangle sign on the wall of tires and tire bulge on the bottom.
  If the tire is flat nip with the bulge, then immediately change your tire.
• Machine checks
  Make checks engine room at least once a week on the engine oil, brake oil, radiator water and battery water. Make sure the height of water or oil are under the maximum. Then check the rubber-rubber hose and fan belt. Make sure all is still flexible and not have crack.
• In checking Cars
  When the car enters the cabin important issues that need to check is the condition in the rubber clutch pedal, brake and gas. Everything must be attached with the good and not thin. Then, check the hand brake the car, especially the lever and breach-block. Everything must be in working condition and well

USE OF SAFETY NEGLIGENCE BELT WILL FATAL RESULT

We strongly recommend that every driver and passengers to wear safety belt, to avoid the increased likelihood of severe injuries during an accident.
Comfort and security into every important thing that we travel. Often we ignore the security factors, including safety belt use.
Follow these tips about safety belt below :

USE

• Avoid sink back seat is too low. Safety belt to provide maximum protection at the back seat in the upright position.
• For your son-daughter who has not been big enough to wear safety belt, it is
  place for them to sit in the middle seat. Statistics prove the accident, children will be more secure and protected on the back seat of the front seat.
• Make sure your seat belt does not bind or get caught in doors or seats.
• Avoid the use of a seat belt for two children.
• Avoid also let the children sit in your lap, because this is not enough to protect them.
• For pregnant women, are encouraged to stay put on a belt security and use the lowest possible on the hip rather than the waist.
• After entering the clasp, make sure that the clasp was locked in the crook.
• Avoid the use of coins in the clip and buckle, as this will impede the locking clasp in the crook.

HOW TO WORK
Lock will lock the safety belt if there is:

• Sudden termination of
• There was a bump
• When you careen forward quickly.

The slow movement allows akan belt sweep and you can move freely with.

CARE

• Avoid using solvents, bleach, dye or purifier abrasif, this will Impair the safety belt.
• Check the belt system periodically, checking if there is a part cut off, and straggling lax.
• Component that is damaged must be replaced and do not modify or disassemble the system.
• Change the safety belt assembly (including bolts) if ever used.

In a great accident. The entire assembly must be replaced even if damage does not appear.

TIPS - RIDE CAR

Scanning
While in the car, need to pay attention to all road users about road conditions or, for example, motorcycles, cars, signs, pedestrian or important objects that can affect other energy while driving.
Blind Spot
Blind Spot is an area that is not seen directly by the rearview mirror center, right or left. With this limitation, it is necessary to familiarize oneself to do the Shoulder Check that the right to turn left or right according to the direction you turn.
Safe Following Distance
While in the car, keep safe distance ideal car with the car in front is about 3 seconds.

How:
Discover the benchmark large enough and does not move along the road. Then when the car in front of others across the benchmarks, the countdown with the number'1000 and 1, 2, and in 1000, 1000 and 3 '.
Make sure the car passes the same benchmark at the end of the count.
If you are right, then you've met the ideal safe distance.

Safe Stopping Distance
When the car stopped, make sure the car is quite sufficient distance so that both can see the back of a car tire that is in the future. This is so easy for the condition that occurs when you have to force the exit of the queue of vehicles.
Parking
For easy time parking, need to understand and use the pole-pole in the car.